For all cases where it is necessary to automatically or semi-automatically activate the gas burner, but the spaces or distances do not allow the presence of an electrical panel, we provide solutions with a small electrical control panel directly adjacent to the burner.
VG burner installed in a duct for a plug and play solutions. This solution are ideal for heating fresh air in make-up and process air heating applications. The system is equipped with control panel that can be customizable with temperature controller and/or PLC that allow to control the process via App. VG is mostly used to produce […]
Santin Burners, develops automatic heating stations. The station includes a Santin burner with air/gas trains and panel with Programmer/PLC that manage the heating treatment ramp. The operation with Programmer/PLC allows to get a uniform and progressive heating optimizing consumption. The PLC includes smartphone, tablet and PC/Mac apps that allow a remote control and vision of […]
For Coffee Roaster Machines
Our post-combustor PC type are studied and developed for coffee roadster machines and with a simple changes, they are suitable for all industrial applications. After a control carried out by competent authorities, we are able to affirm that PC is suitable to remove fumes and dusts. PC can be installed inside or outside and in […]
Bespoke solutions, custom design starting from our burner head N-BFN or MXS. Santin Burners develops packaged solution with gas train, blower and customizable panel for any industrial application. These burners are mostly used for ladle heating, ovens/furnaces heating treatment and pre-heating application with automatic burner compliance to EN746-2.
Stainless steel modular burners – Low NOx
The VD air vein burner is used for different applications, and that is for driers, ovens, textiles drying furnaces and others. VD burners generate a compact a smooth flame with lox NOx emissions. VD is a modular burner developed in 304 and 430 stainless steel. The modular units can be assembled in many different shapes […]
Monoblocco up to 93 KW
The CB burner is used for small afterburners, incinerators, air generators, small furnaces and boilers in general. It is supplied with single or two stage flame versions. On request it can be equipped with a thermoregulator pr PLC to control the temperature. An electronic device controls all the different steps for the automatic operation, for […]
Atmospheric or premix burners – Custom solutions
Thanks to our BS (brass spouts) nozzle mix Bruciatori Santin developed small manual custom linear burners called BLOS. The semi-automatic BLOS burner is mainly used for roasting machines, to warm up large pots drum mixers, industrial deep fryers and galvanic processing. The burner works in atmospheric or premix mode with methane gas or GPL using one […]
With blower – Low gas pressure – Suitable for screws industries
The SCALDAFILO burner is mainly used for bolts and screws to warm up the thread before screw processing. SCALDAFILO is developed using LN linear burner. It is available in the one stage version and in the dimensions described in the table below. ** Available bespoke solution with modulating mode 4.20mA ** An electronic device controls all the different […]