Bruciatori santin develops atmospheric or air manual burners with compressed air or blower equipped with safety valve and thermocouple. Manual burners can work with natural gas or LPG low or high pressure and are suitable for molds heating, small industrial leadles, small furnace, ovens and crucibles. All Bruciatori Santin manual burners can be equipped with ignition system 230V or 1,5V.
FB burner
Atmospheric and manual burners
Thanks to our BS (brass spouts) nozzle mix Bruciatori Santin developed small manual custom linear burners called FB. FB burner is a small burner very versatile and suitable to multiple uses. Particularly it is useful when is necessary warm up big pots or when is required a burner to warm up a tanks. Thanks to its […]
Burners for food-related applications · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces
BLOS Burner series
Atmospheric or premix burners – Custom solutions
Thanks to our BS (brass spouts) nozzle mix Bruciatori Santin developed small manual custom linear burners called BLOS. The semi-automatic BLOS burner is mainly used for roasting machines, to warm up large pots drum mixers, industrial deep fryers and galvanic processing. The burner works in atmospheric or premix mode with methane gas or GPL using one […]
Burners for forges · Burners for food-related applications · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces
Small burner TR series
Atmospheric or with MIXER – Suitable for RAKU kilns
TR burner belongs to the small burner category available in atmospheric solution or with forced air with MIX100. TR have curved body. Thanks to its small size and low thermal power they are particularly suitable to warm up small industrial ladle, melting pot and for ceramic processing in RAKU kilns. TR gas burner may be equipped with […]
Burners for ceramic processing · Burners for foundries · Burners for forges · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces
D. Series
Compressed air – Low gas pressure and mixer MIX100
It is suitable for every industrial applications, D Series burner is also suitable for: Molds heating Industrial ladles heating Melting Thanks to its ductility, D series can be adapted for every heating or preheating operation. D. Series burners are available in the following working mode: 1. Manual 2. Manual with safety valve 3. utomatic – […]
Burners for foundries · Burners for forges · Burners for food-related applications · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces
Small burner, TCU series
Atmospheric or with MIXER – Suitable for RAKU kilns
TCU burner belongs to the small burner category available in atmospheric solution or with forced air with MIX100. TCU have curved body. Thanks to its small size and low thermal power they are particularly suitable to warm up small industrial ladle, melting pot and for ceramic processing in RAKU kilns. TCU gas burner may be equipped with basement otherwise thanks to […]
Burners for foundries · Burners for forges · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces · Burners for ceramic processing
Tromboncino TSG burner
Atmospheric – Gas high pressure
TSG burner is a typical manual gas burner . it can be equipped with manual tap or safety valve which guarantee its use safely. TSG burner it’s mainly used in foundries and is used to heat up moldes, brackets, dies or any other part. It works with air suction and high pressure gas. The setting […]
Burners for foundries · Burners for forges · Burners for food-related applications · Burners for industrial applications · Burners for mold heating
LN – Nido d’ape burner
Atmospheric or with blower – Custom linear burner
The LN NIDO D’APE burner is particularly suitable in the textile sector, specifically in the ribbon processing, where the burner is applied in the cylinder to warm up it and process the textile. LN NIDO D’APE burner can also used in other heat processing including cleaning metal conveyors. It is a premix burner designed to […]
Burners for textile industry · Burners for tape/ribbon processing · Burners for industrial applications · Burners for mold heating · Burners for industrial furnaces · Burners for food-related applications
SCALDASTAMPI burner
Atmospheric or with combustion air – Custom solutions
With ZOPPAS nozzle, Bruciatori Industriali Santin develops custom SCALDASTAMPI burners. The SCALDASTAMPI burner was created to warm up the dies for die-casting machines and moulding benches. It is ideal for mould heating applications. It’s made by an carbon steel square tube or stainless steel and flame spreading heads to warm up the two sides of the die. It […]
Burners for industrial applications · Burners for mold heating · Burners for foundries · Burners for forges