SIR – Bruciatori Rigenerativi

Bruciatori Rigenerativi

SIR are direct heating burners.  SIR burners work in pairs and they exchange heat through heat exchanger that gets heat during alternate suction. This kind of burners allow to get a consumption reduction compared with tradition burners but also compared with other regenerative burners in market. Indeed, thanks to special internal system SIRaspires hot air from the furnace allowing to get exchange every 2 minutes.

Exhaust gases are ejected about 85/90% through the burners and 10/15 % through the furnace chimney .

SIR are Low-Nox burners and can be used up to 1400 °C. SIR are ignited with pilot and detection with UV sensor (the pilot burner and the UV sensor are not included).

Pilot and UV are mandatory for temperature operation below 800°C  (UNI EN746-2).

APPLICATION

  • Forging furnaces;
  • Smelting furnaces;
  • Heat treatment;
  • Glass treatment;

Models and versions

Table with approssimate consumptions for this model

Model Kcal/h LPG consumptions kg/h Methane consumptions m3/h
SIR50 516.000 (600 kW) Risparmi fino al 40% Risparmi fino al 40%
SIR75 860.000 (1000 kW) Risparmi fino al 40% Risparmi fino al 40%
SIR150 1.290.000 (1500 kW) Risparmi fino al 40% Risparmi fino al 40%
SIR300 2.580.000 (3000 kW) Risparmi fino al 40% Risparmi fino al 40%

Applications

This model is normally used for the following applications

Are you interested in this product?

If you are interested to receive more information on burners, accessories or a quotation

Contact us now